General Description:
Quick-Flowment Filter cartridge is a new product developed by Darlly Filtration Equipment Co.,Ltd in Hangzhou China based on new market requirements. Its target market is 4G to 8G LCD processing, and can be used to similar applications too. The large diameter with big filter area insures to reduce the number of filter cartridges and the dimension of housing required. The long service life and high flow rate result in low investment and less manpower in many applications. The cartridge has two kinds of configurations:83mm diameter,--226 double O-ring; 131mm diameter ,--334 single O-ring. There are four filter media types: PP (Pleated, Melt blown),PES membrane, PTFE membrane, Hydrophilic PTFE membrane.
Specifications:
Dimensions
● Outside Diameter: 83mm; 131mm
● Length: 10 inch(251mm), about 260mm including O-ring adaptor
Material Of Constructions:
● Filter media: Pleated depth Polypropylene (PP), or Melt blown PP; Hydrophilic PES membrane; PTFE membrane; Hydrophilic PTFE membrane.
● Support/Drainage: Polypropylene (PP)
● End caps : Glass Polypropylene (PP)
● O-ring seal :EPDM, FEP encapsulated Viton, Silicone
Performance:
● PP: 0.1µm, 0.22µm, 0.45µm,1µm, 1.2µm ,3µm, 5µm, 10µm,20µm,50µm
● PES: 0.22µm, 0.45µm, 1.2µm
● PTFE: 0.22µm, 0.5µm, 1µm, 3µm, 10µm
● Hydrophilic PTFE: 0.5µm, 1µm, 3µm, 10µm
● Maximum Operating Temperature: Melt Blown PP: 65℃; Others: 80℃
● Maximum Differential Pressure: Melt Blown:1.03Bar at 65℃; Others: 4.0Bar, at 20℃; 3.0Bar at 65℃
● Recommended Change out Differential Pressure:2.4Bar at 20℃
Part numbers/ordering information
Darlly quick-flowment filter cartridge P/N:
DLQF* #= +(e.g.,DLQF334-PP-0.45-s)
Code* cartridge type
222 diameter 83mm,-222 double o-ring
226 diameter 83mm,-226 double o-ring
334 diameter 131mm,-334 single o-ring
Code# media type
PP PP PLEATED
PM PP MELT BLOWN
PES PES
PTFE PTFE
WPTFE HYDROPHILIC PTFE
Code+ Seal material
E EPDM
F E-FKM 10 10μm
S SILICONE
code= removal rating
0.1 0.1μm
0.22 0.22μm
0.45 0.45μm
1 1μm
1.2 1.2μm
3 3μm
5 5μm
10 10μm
20 20μm
50 50μm