PRODUCT DESCRIPTION
type Ⅱ 2WD LHD toyota gasoline ambulance
Landcom typeⅡ2WD LHD toyota gasoline ambulance is a special medical car which often is used for rescuing patients. It may be used in the hospital, emergency medical center, airports and so on.
Exterior pictures of ambulance
erior pictures of ambulance
1. Wall cupboard
2. Room Lamp
3. Sliding infusion equipment
4. Interior roof ventilator
5. Sterilizing lamp
6. Illumination lamp
7. Air conditioning inlet
8. Warning mark
9. Side sliding door
10. Intercom system
11. Attendant seat
12. Operation panel
13. Doctor seat
14. Oxygen uptake device
15. Long bench
16. Power socket
17. Safety belt
18. Oxygen cylinders
19. Storage box
20. Device table
21. Fire extinguisher
22. Device fixing plate
23. Oxygen bottle cabinet
24. Emergency devices cabinet
25. Auto lift stretcher
26. Medical floor
27. Warm braw outlet
【Interior 3D diagram of ambulance】
【Technical specifications of ambulance】
General structure characteristics
(1)Max speed≥145KM/h
(2)Front engine and rear drive
(3)Powerful bumper bar
(4)Crumple zone
(5) Brake pedal and steering shaft to reduce into invasion rotary device
(6) Aluminum alloy hub
Weight parameters
(1)Dead weight of car body≤2400 Kg
(2)Full payload weight≥3000 Kg
Geometric parameters
Overall dimensions: 5380X1880X2400 mm (LXWXH)
Dimension of Patient's compartment: 3465 X1728 X1610mm (LXWXH)
Wheelbase : 3110mm
Minimum turning radius :6200mm
Engine
(1)Displacement(L):2.694
(2) 2TR-FE gasoline engine
(3) Engine power rating≥111Kw
(4) Maximum torque≥240N.m
(5) Maximum rotating speed≥4800
(6) China IV emissions
(7) Imported engine, four cylinder, electronically controlled fuel injection gasoline engine, intelligent variable valve timing control system, and fuel-efficient.
Generator
Generator output is 14 v / 120 A, under guaranteeing the vehicles themselves the maximum power condition, the generator can provide additional power (including power inverter into 220 v), to satisfy the electricity demand of the emergency lights, alarm, communication, medical equipment and etc.
Braking
Four-wheel anti-lock braking system (ABS)
Air conditioning system
Changes in temperature air conditioning,front and rear double air conditioning/ Double constant temperature,Independent control
(1)Under the condition of the environment temperature 20 degrees,Starting the heating system ,The Indoor temperature will reach at least 16 degrees in 15 minutes.
When the environment temperature is 40 degrees, the indoor temperature will be at least more than seven degrees below ambient temperature.
【The modified items of Toyota Hiace Ambulance】
The ambulance interior trim
(1)The internal structure of ambulance and decorative material fireproof performance Should comply with the GB8410-1994 "---the combustion characteristic of automobile interior trim materials requirements.
(2)Adopts disposable composite mould forming process.
(3)Medical cabin interiors should be mouldproof, anti bacteria, anti-static ,moisture-proof, flame retardant, easy to clean and easy to disinfect.
Open emergency medicine stand
(1)Using composite material one-time die forming.
(2)Sugar, salt, mannitol, ice packs, etc first aid items can be placed on it.
Medical Cabinet
(1)Medical Cabinet can be respectively placed consumables, injection products, trauma dressing, isolation protective equipment, emergency intubation box, press pump, kornland emergency air cushion, soft stretcher and breathing machine, etc.
(2)Medical Cabinet is made of Slide door which manufactured with high quality fire prevention board, drawers, and overhead door, the sealing side of special aluminum alloy material, sealing side and interface with no sense of tentacles.
Monitor cabinet
It is equipped with an independent monitor placing platform, which can facilitate the doctor observation and operation.
Operation platform
(1)Independent doctor operation platform, so that the doctor can treat the patient conveniently.
(2)Control panel above the platform, and the control panel need to install medical electric socket (12 v, 220 v).
(3)Installing a set of suction apparatus and oxygen connector respectively
(4)Microcomputer liquid crystal display control system, equipped with emergency manual switch control system at the same time to cope with sudden failure.
Partition Wall
(1)Partition wall makes the cockpit and emergency tank completely isolated, which is made of high quality fire prevention board.
Reserving the perspective window above the mid-board ,and the perspective window made of organic glass can be moved back and forth.
(2)Around the mid-board connected to the automobile body by a special sealing to seal.
Oxygen tank cabinet
(1)Adopts disposable composite mould forming process.
(2)Modelling structure is convenient for medical personnel ,including the operation of the oxygen valve and observation of the pressure gauge, loading and unloading.
(3)Two piece of 10L aluminum alloy medical oxygen bottles, which can switch automatically, interface requirements for metric rib.
Cabinet seats
Cabinet seats on the right side of medical cabin , using imported Composite materials one-time die forming,cushion with seat belts and safety armrest can take many people at the same time.
Power supply system
(1)24 hours of uninterrupted power supply, can output 220 v, 600 w pure sine wave power supply used for precision medical equipment, and the 12 v 、220 v power socket placed in the appropriate position.
(2)The leakage and the short circuit protector in the 220 v power output end.
Storage battery
Maintenance free, special battery for motor vehicle, when parking, for on-board medical apparatus using.
Inverter
Imported, intelligent inverter, the 12 v input, the output is 220 v, 600 w power supply pure sine wave.
Solenoid valve
Connected or disconnected automatically, it can ensure that the ambulance battery in best condition and do not affect the dispatch of a vehicle because of the battery losing electricity.
Stretcher system
(1)Stretcher Used to get on an ambulance
(2)Stretcher combination platform
(3)Shovelstretcher
Warning light and alarm
New long row of alarm lamp[Alarm (100 w)], rear flank LED square strobes, multiple levels and bridge control.
Oxygen system
(1)Two metric oxygen tanks of 10L
(2)High pressure relief valve
(3)Plug and play humidification bottle
(4)Oxygen pipe need to install and detection is convenient.
Aspirator system
Equipped with separate suction apparatus and suction bottle,it is removable, clean, low noise, easy to operate.
The sterilization system
Uv disinfection lamp
Work light
The light is downy, uniform distribution, which can meet the needs of doctor’s operation.
Fixed system
Installing multiple infusion frame above the stretcher used to get on an ambulance, bear load> 5 kg.
The cockpit storage locker
Storage bins using imported composite material one-off mould forming process. On which can be placed items such as folder and large cups, easy to pick up.
Fire extinguisher
Equipped in front cabin and rear compartment
The Vehicle configuration of Toyota Hiace Ambulance
No. |
Configuration items |
Configuration details and advantages |
1. |
LED warning light alarm system
|
One set of high brightness LED long line blue warning lights installed on the top of the ambulance(with 100 w loudspeakers) |
2. |
Four rectangular high brightness LED blue flashing warning lights were installed on both sides of the ambulance’s roof. |
|
3. |
Four rectangular field use white LED lights with high brightness respectively installed on both sides of the roof. |
|
4. |
Two cylindrical high brightness LED blue flashing warning lights installed in the rear section of the roof. |
|
5. |
Two rectangular high brightness LED blue flashing warning lights installed in the rear of the back door. |
|
6. |
one set of lights, alarm controller and propaganda apparatus installed in the wheelhouse. |
|
7. |
Emergency appearance mark
|
The ambulance head, tail and both sides of the ambulance body paste one set of blue or red reflective warning tape. |
8. |
Glass fiber reinforced plastic interior
|
Medical cabin interior includes the left and right side wall, roof, and partition wall adopt a forming die FRP technology.
|