Medium Pressure Centrifugal Fan

Original
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Beijing
Validity to: Long-term effective
Last update: 2019-02-23 08:15
Browse the number: 462
inquiry
Company Profile
 
 
Product details

XH-CM-G11 Medium pressure centrifugal fan

Product Introduction 
The XH-CM-G11 Medium pressure centrifugal fan is suitable for the air supply system of the 2~670t/h steam boiler in the thermal power plant and meets the requirements of the performance parameters of the high pressure head of the fluidized bed boiler. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems.
The fan conveys air, and the induced fan conveys gas or gas containing impurity particles. When the impurity depth is less than 200mg/m3, it can be used for more than 4 years. It can also be used if it contains large impurity, but its service life will be shortened. The maximum operating temperature of the draft fan shall not exceed 250 ℃.

Performance and selection
1)The draft fan is made into a single suction form. There are 40 specifications for №8~29.5 each 20 machine numbers.
2)Each fan can be made into left or right rotation two forms.
3)The outlet position of the fan is expressed by the outlet angle of the housing.
4)Fan drive mode is D type (cantilever structure), the connection between motor and fan adopts elastic coupling and direct transmission.
5)Examples of full product names are as follows:
XH-CM-G11 18D 90 degrees right
XH-CM-G11 18 D 0 degree left
The pressure coefficient of the highest efficiency point is 10 times, 51 is the specific speed, 1 is the first design, and the other 18 is the impeller diameter of 1800mm.

XH-BI- 11 Boiler fan Fan structure
1)This series of fans adopts advanced technical achievements such as high strength wear-resistant impeller, oil-proof bearing box, joint axial adjusting door and so on.
2)Wide range of high-efficiency operating conditions, fan machine number arranged closely, easy to select high-efficiency operating point.
3)Adopt adjustable air inlet. The axial and radial clearance of the inlet and impeller are adjusted when the fan is installed.
4)High strength wear-resistant impeller. The impeller adopts the backward veneer blade to reduce the airflow impact, the stability is good, the motor is not easy to overload, and the service life of the fan is greatly prolonged. This type of fan has high pressure coefficient, low cycle speed and low noise, so it has good practicability.
5)Oil leakage proof bearing box. The lap oil jitter ring is used to throw the oil from the high speed rotating bearing into the inner wall of the bearing box, and the semi-open aluminum oil seal can increase the resistance along the axial direction to cut the partial thin oil back to the tank, except for the convenience of repair and prevention of friction accidents. The outer pressure plate is blocked by a small amount of thin oil, and the upper part of the bearing box is equipped with a ventilator to reduce the micro-positive pressure in the bearing box, ensuring no oil leakage and good dust-proof performance.
6)Joint type axial adjusting door. There are joint bearings at the fulcrum of the guide vane and the regulating rod of the regulating door. There is no "dead" point in the operation and adjustment process, so the adjustment is flexible and labor-saving, and the installation is reliable, which ensures that the actuator does not carry any load.
7)The fan is an integral or split assembly type. The transmission group of the series fan below 16D, the coupling cover and the motor are assembled on a complete base before leaving the factory; The housing, inlet and adjusting door are another component, the small type fan is assembled into two components when it leaves the factory, and the large model is decomposed and assembled into multiple components for transportation and installation.
8)The fan has cantilever structure, convenient arrangement, direct transmission of motor, uniform transfer of torque, reduction of vibration, and reliable operation of the fan.
9)The fan is convenient for installation and maintenance. The fan has two parts complete base shaft and transmission group, the housing has middle or vertical face, it is especially convenient to disassemble and assemble, the rotor can be suspended vertically, if the impeller is replaced only, it can also be disassembled in axial direction.

Product Parameter
XH-CM-G11


     

Rotate Speed
(r/min)

Total Pressure
(pa)

Air Quantity
(m3/h)

Required Power
(kw)

Power
(kw)

8D

1450

2525

9900

12

4

2524

12100

13

2435

14300

14

2346

16500

15

18.5

2169

18700

16

1992

20900

17

1771

23100

18

9D

1450

3195

14100

20

30

3194

17200

23

3081

21200

25

2969

23500

27

37

2745

26600

29

2522

29700

31

2241

33000

33

10D

1450

3944

19300

34

45

3943

23600

39

3804

27900

43

3666

32200

46

55

3389

36500

50

3113

40800

53

2767

45100

55

11D

1450

4772

25700

55

75

4771

31400

62

4603

37100

68

4436

42900

74

90

4101

48600

80

3767

54300

85

3348

60000

89



Rotate Speed
(r/min)

Total Pressure
(pa)

Air Quantity
(m3/h)

Required Power
(kw)

Power
(kw)

11D

960

2092

17000

16

22

2091

20800

18

2018

24600

20

1944

28400

22

30

1798

32200

23

1651

36000

25

1468

39700

26

12D

1450

5679

33400

85

110

5678

40800

96

5478

48200

105

5279

55600

114

132

4880

63100

122

4483

70500

130

3984

77900

137

12D

960

2490

22100

25

37

2489

27000

28

2401

31900

31

2314

36800

33

45

2139

41800

36

1956

46700

38

1746

51600

40

13D

1450

6665

42400

126

160

6664

51900

143

6429

61300

157

6196

70700

170

180

5728

80200

183

5261

89600

195

200

4676

99000

204


Rotate Speed
(r/min)

Total Pressure
(pa)

Air Quantity
(m3/h)

Required Power
(kw)

Power
(kw)

13D

960

2922

28100

37

45

2921

34300

42

2818

40600

45

2716

46800

49

55

2510

53100

53

2306

59300

56

2050

65600

59

14D

1450

7739

53000

183

220

7728

64800

207

7456

76600

227

7185

88400

246

250

6642

100000

264

6101

112000

282

280

5423

124000

296

14D

960

3388

35100

54

75

3387

42900

60

3268

50700

66

3149

58500

72

90

2911

666200

77

2674

74200

82

2377

821000

86

15D

1450

8873

65100

258

315

8872

797000

292

8559

94200

321

8249

109000

349

355

7625

123000

373

7004

138000

399

400

6226

152000

417

http://www.xinhuablower.com/

Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]