This model can process raw materials reach 4.5-5t/d,very suitable for small and medium - sized factories for pressing soybean,sunflower,sesame,peanut etc.
Machine materials:
Pressing screws parts are made of 45# steel
Machines main body is made of high quality ductile cast iron (impact resistant)
Gears inside gearbox are made of all-steel;
Oil tray and oil cover are made in stainless steel
Main Specifications for Model 100 Oil Press
Shaft speed: 3040r/min
Gear ratio in gearbox: 15/4015/55=1:9.78
Motor7.5KW1440r/min
B type triangular belt with the length of 3200mm
. Outer dimension: LengthWidthHeight(mm)
LM-L: 16406401200
Weight: about 450kg
Production Capacity (chart1)
MODEL 100 SCREW OIL PRESS
Raw material |
Raw material per 24hkg |
oil output |
Dry cake residue% |
|
Rape seeds |
Hot pressing |
3500-4000 |
30-38 |
7.5-8 |
Cold pressing |
1800-2000 |
28-35 |
|
|
Ground nuts |
Hot pressing |
3500-4500 |
35-45 |
7 |
Cold pressing |
1500-2500 |
32-40 |
|
|
Bean |
Hot pressing |
3300-3800 |
10-16 |
6.5-7 |
Cold pressing |
1700-2500 |
8-14 |
|
|
sesame |
Hot pressing |
3500-4000 |
44-47 |
6.5-7.5 |
Cotton seeds |
Cold pressing |
2000-2500 |
10-14 |
5.5-6.5 |
1. Figures shown above reflect performance when selecting, shelling, flaking, roasting facilities are all available and when manufacturing is rational.
2. Since the difference of raw materials on oil varieties, qualities and oil contents, as well as the working conditions, the actual outcome may be a little different from that shown in the chart.
3. Raw material feeding (t/24h) refers to the capacity after once hot press, and it would reduce to half of it if twice and one third if three times. And so forth, the more times of hot press, the fewer raw materials feeding it would be
Structure of machine
This machine consists of five main parts, including gearbox, press case, hopper, pressing screw and machine body. As shown in Figure
1.Gearbox 2.Press case 3.Hopper 4.Pressing screw 5.Machine body |
6YL-100 Model Pressing Cage Chart
1. Round plate No.1 2.Round plate No.2
3-5.Round plate No.3-5 6.Round plate No.6
7-13. Round plate No.7-13 14. Round plate No.14
15-17. Round plate No.15-17 18. Adjustable bolt
19.Rods holder 20. Pressing rods
21. Short flat key 22.Upper pressing cage
23.long flat key 24.Under pressing cage
Pressing screw for 6YL-100
Item |
Description |
Qty per set |
Item |
Description |
Qty per set |
1 |
screw shaft |
1 |
13 |
tight nut |
1 |
2 |
long flat key |
1 |
14 |
adjusting bolt |
1 |
3-9 |
worm No.1-7 |
1 |
15 |
adjusting bolt bush |
1 |
10 |
cake guide ring |
1 |
16 |
end nut |
2 |
11 |
press nut |
1 |
17 |
safe cover |
1 |
12 |
bearing |
2 |
CE certification
If you're looking for the cold press oil extraction machine with ce 6yl-100, welcome to buy the quality and cheap cold press oil extraction machine with ce 6yl-100 with us. We are one of the professional press machine manufacturers and suppliers in China. We will also offer you the wholesale service at big discount.